Ssh Level Commands - Lantronix XPort Pro Command Reference Manual

snmp level commands Description
location <string>
name <string>
no community ro
no community rw
no contact
no host <ip address>
no location
no name
server disable
server enable
show
show history
traps disable
traps enable
write

ssh Level Commands

Command Path: enable>ssh
Level Prompt: ssh
The following is a list of commands available in the ssh level.
ssh level commands
client server <server>
client server <server> <key>
client user <user> <command>
client user <user> <password>
<command>
client user <user> <password>
<command> <public> <private>
client user <user> generate dsa 1024
client user <user> generate dsa 512
client user <user> generate dsa 768
XPort Pro™ Command Reference
Sets the SNMP system location.
<string> = location of device.
Sets the SNMP system name.
<string> = SNMP system name.
Clears the SNMP read-only community.
Clears the SNMP read/write community.
Clears the SNMP server contact.
Deletes the designated SNMP server trap host.
<ip address> = IP address of an SNMP server.
Clears the SNMP server location.
Clears the SNMP server name.
Disables the SNMP server.
Enables the SNMP server.
Displays the SNMP server settings.
Displays the last 20 commands entered during the current
CLI session.
Disables the sending of SNMP trap messages.
Enables the sending of SNMP trap messages.
Stores the current configuration in permanent memory.
Description
Set Client Server RSA or DSA key
Set Client Server RSA or DSA key
Set Client User, command and RSA or DSA
keys
Set Client User with password, command
and optional RSA or DSA keys
Set Client User with password, command
and RSA or DSA keys
Generate DSA public and private keys
Generate DSA public and private keys
Generate DSA public and private keys
3: Summary of CLI Commands
55