Updating Firmware - Mircom TX3 Series Installation And Operation Manual

As an alternative, the PC also connects to the controller board modem. The TX3
system is compatible with the following modems:
•
•
•
•
•
Additional modems are currently being tested for compatibility.
The TX3 configuration is set using either the unit's own keypad and display or via
the PC Configuration Software.
4.9.1 PC System Requirements
The minimum system requirements are as follows:
•
•
•
•
•
•
Note:
4.10

Updating Firmware

Firmware updates require a specialized hardware initialization procedure. After
the hardware initialization, use the TX3-MSW Configuration Software wizard to
complete the firmware update. Firmware upgrade is not supported on 64-bit
systems.
There are three types of firmware updates; 'major', 'minor' and 'revision'.
Whenever there is a major or minor firmware update, the next time the
configurator software connects to the network, it autosenses the new default
Telephone Access System Installation and Operation Manual
52 (112)
LT-969 Copyright 2012
TrendNet TFM-560U High Speed USB 2.0 Fax Modem
TrendNet TFM-561U High Speed USB 2.0 Fax Modem
Hiro H50113 56K V.92 USB Fax Modem
StarTech USB56KEM2 56k V.92 USB Fax Modem
Zoom 56K V.92 56K USB Mini External Fax Modem
Windows 7 (32 bit)
Windows XP SP2/ Vista (32 bit)
512 RAM
1 GHZ CPU
600M disk space
1 USB port
Firmware upgrade is not supported on 64-bit systems.
Lobby Control Unit Setup
Version 1.6