Table of Contents
Advertisement
1. First of all
1.1 Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the product as
follows, for safety purpose. Please know their meanings beforehand, and heed them.
WARNING
CAUTION
NOTICE
1.2 Important safety instruction
The followings are important instructions for safely using the product. Be sure to follow
them always when handling the product.
WARNING
● Never use the product in or after an abnormality (ex. giving off smoke, smelling
strange, took a liquid or an object inside, broken, etc.) If an abnormality should occur,
unplug the projector urgently.
● Situate the product away from children and pets.
● Do not use the product when there is fear of a thunderbolt.
● Unplug the projector from the power outlet if the projector is not used for the time
being.
● Do not connect the projector to a power supply while no lens unit is attached to it.
● Do not open or remove any portion of the product, unless the manuals direct it. For
internal maintenance, leave it to your dealer or their service personnel.
● Use only the accessories specified or recommended by the manufacturer.
● Modify neither the projector nor accessories.
● Let neither any things nor any liquids enter to the inside of the product.
● Do not wet the product.
● Apply neither a shock nor pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or the
leaned table.
- Do not place the product unstably. Place the projector so that it (even the lens part
installed) does not protrude from the surface where the projector is placed on.
- Always move the projector with two or more people. Place your
hands in the dented parts on the bottom of the projector when
carrying the projector.
- Remove all the attachments including the power cord and
cables, from the projector when carrying the projector.
- Do not lengthen the elevator feet exceeding 30 mm.
● Do not look into the lens and the openings on the projector, while the lamp is on.
● Do not approach the lamp cover and the exhaust vents, while the projection lamp is
on. Also after the lamp goes out, do not approach them for a while, since too hot.
● Do not apply the laser beam of the remote control to anything except the screen.
LX750/LW650/LS+700 User Manual-Concise
This entry warns of a risk of serious personal injury or even death.
This entry warns of a risk of personal injury or physical damage.
This entry notices of fear of causing trouble.
2
Dented parts
020-000158-01 Rev. 1 (03-2009)
Advertisement
Table of Contents
