Page 1
LX750/LW650/LS+700 U S E R M A N U A L - N E T W O R K G U I D E 020-000160-01...
Page 3
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas. All other trademarks are the properties of their respective owners. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
3.6 Command Control via the Network ............41 3.7 Controlling the external devise via the projector (using the NETWORK BRIDGE function) ..........46 3.8 Batch-controlling multiple projectors (using the DAISY CHAIN function) ..50 LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Image files can be sent via the network, and up to 4 image data can be stored in the projector and displayed on screen one by one. ( Transfer image data Display image data ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
2) installed a web browser software ( LAN cable : CAT-5 or greater NOTE • The system for using the network function of the projector requires communication environment conforming 100Base-TX or 10Base-T. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.2.2.a) * Administrator authority is the account, which can access to all functions. Fig. 2.2.2.a “Network and Internet Connections” window 4) Open “Network Connections”. (Fig.2.2.2.b) Fig. 2.2.2.b “Network Connections” window LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 8
6) Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties” window. Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 7) Set IP address, subnet mask and default gateway for PC. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 9
* DHCP is abbreviation for “Dynamic Host Configuration Protocol” and has the function to provide necessary setting for network like IP address from server to client. A server that has DHCP function is called DHCP server. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
1) Start browser in PC and specify following URL, then click “ ” button. URL: http://(Projector IP address)/ For example, if projector IP address is 192.168.1.10, specify URL: http://192.168.1.10/ 2) If Fig. 2.2.4 appears, it succeeds. Fig. 2.2.4 “Logon Menu” LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
( 3.8 Batch-controlling multiple projectors (using the DAISY CHAIN function) Using the DAISY CHAIN function can simultaneously control multiple projectors connected to a shared RS-232C bus, from the computer. ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Q832894 (MS04-004) or the web browser interface may not be displayed ® correctly. And when using an earlier version of Internet Explorer , during operations the browser will log out after 50 seconds. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 14
Security Settings √ and other security settings. Projector Control Controls the projector. √ √ Projector Status Displays the current projector status. √ √ Restarts the projector’s network Network Restart √ connection. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Fig. 3.1.1 b “Logon with Administrator ID” Fig. 3.1.1 c “Logon with User ID” 3) Click the desired operation or configuration item on the main menu located on the left-hand side of the screen. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Firmware Date is only displayed when logged on using an Administrator ID. Displays the network firmware version number. This Firmware Version information is only displayed when logged on using an Administrator ID. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Configures the image transfer port (Port:9716). (Port:9716) Port open Click the [Enable] check box to use port 9716. Click the [Enable] check box when authentication is required Authentication for this port. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 19
• The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Test Mail] button. Please enable Send mail setting before clicking [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
The SNMP access is detected from the invalid SNMP Authentication Failure community. Refer to “Troubleshooting” in the User’s Manual (detailed) – Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 22
Web page, the e-mail will be sent out. • Filter Time Alarm is defined as a threshold for e-mail notification (reminder) of the filter timer. When the filter hour exceeds this threshold, the e-mail will be sent out. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Configures the specific date (No.2) schedule. Specific date No.3 Configures the specific date (No.3) schedule. Specific date No.4 Configures the specific date (No.4) schedule. Specific date No.5 Configures the specific date (No.5) schedule. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 24
• After the projector is moved, check the date and time set for the projector before configuring the schedules. Strong shock may make the date 23) get out of tune. and time settings ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Configures the day of the week daylight savings time ends (Sun, Mon, Tue, Wed, Thu, Fri, Sat). hour Configures the hour daylight savings time ends (0 ~ 23). Time minute Configures the minute daylight savings time ends (0 ~ 59). LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 26
• The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled. • The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
The length of the text can be up to 32 alphanumeric characters. Configures the User password. User Password The length of the text can be up to 255 alphanumeric characters. Re-enter User Reenter the above password for verification. Password LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 28
When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Selects the P by P Main Area Source setting. MY Image Select MY IMAGE data. MY Image Delete Delete MY IMAGE data. Picture Brightness Adjusts the brightness setting. Contrast Adjusts the contrast setting. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 30
Turns the FRAME LOCK-COMPUTER IN2 function on/off. Computer in 2 Frame Lock-BNC Turns the FRAME LOCK-BNC function on/off. Frame Lock-HDMI Turns the FRAME LOCK-HDMI function on/off. Frame Lock-DVI-D Turns the FRAME LOCK-DVI-D function on/off. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 32
Turns the remote control signal frequency nomal function Remote Freq. Normal on/off. Turns the remote control signal frequency high function on/ Remote Freq. High off. Remote ID Selects Remote ID setting. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Displays the current power status. Input Status Displays the current input signal source. Blank On/Off Displays the current Blank on/off status. Freeze Displays the current Freeze status. Shutter Displays the current Shutter status. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
13) is displayed after restarting the projector’s network • The Logon menu ( connection if the DHCP is set to ON. 3.1.13 Logoff When [Logoff] is clicked, the Logon menu is displayed. ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
The following mail will be delivered to the specified addresses. Subject line :Test Mail <Projector name> Text :Send Test Mail Date <Testing date> Time <Testing time> IP Address <Projector IP address> MAC Address <Projector MAC address> LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 36
Failure/Warning e-mails are formatted as follows: Subject line : <Mail title> <Projector name> Text : <Mail text> Date <Failure/Warning date> Time <Failure/Warning time> IP Address <Projector IP address> MAC Address <Projector MAC address> LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
8) Click [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear [Enable] check box when SNMP trap transmission is not required. 9) Click [Apply] button to save the settings. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
(e.g., ‘Specific date No. 1’ has priority over ‘Specific date No. 2’ and so on. • Be sure to set the date and time before enabling scheduled events. ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 39
[ ] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 40
Replace the battery by following “Internal clock battery” section of the User's Manual (concise). • The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
• It is possible to allocate the image file up to 4 in the maximum. • The image file also can be displayed by using schedule function from the web 36) in detail. browser. Refer to the item 3.4 Event Scheduling ( LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 42
• The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
5) Click [Enable] check box to open Network Control Port2 (Port: 9715) to use TCP #9715. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box. 6) Click [Apply] button to save the settings. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 44
• The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 45
→ This is the value to make zero on the addition of the lower 8 bits from the header to the checksum. Connection ID → Random value from 0 to 255 (This value is attached to the reply data) LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 47
Otherwise, an authentication error will be returned. NOTE • As for the transmission of the second or subsequent commands, the authentication data can be omitted when the same connection. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
• Before connecting the devices, read the manuals for the devices to ensure the connection. For RS-232C connection, check the specifications of each port and use the suitable cable. ( Operating Guide - Technical - Connection to the ports) LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 49
3.1.4 Port settings – Network Bridge Port) NOTE • Any number between 1024 and 65535 can be set up as the Network Bridge port number. It is set to 9717 as the default setting. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 50
Using the BYTES INTERVAL TIMEOUT menu, set the waiting time for response data to match your system. ( Operating Guide - OPTION menu - SERVICE – COMMUNICATION – BYTES INTERVAL TIMEOUT) 50ms 100ms 150ms 200ms ( 50ms) LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 51
• In case that the computer controls to synchronize transmitting and receiving the data, it may not be able to control an external devise well depending on the processing status of the projector. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
• Turn off (the power switch of) both the projector and other devices and unplug, before connecting them. • Do not apply the DAISY CHAIN function to the system that uses a RS-232C bus distributor. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 53
• An unsuitable setup may cause the malfunction of communication with an external devise. 3.8.3 Communication port When connecting the projector to the computer by Ethernet, send the data from the computer to the projector with using the TCP # 9718 port. LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)
Page 54
3.8.5 Command for Daisy Chain control For the command control of the DAISY CHAIN function, see the Technical part of the Operating Guide. ( Operating Guide - Technical – Daisy Chain Communication) LX750/LW650/LS+700 User Manual Network Guide 020-000160-01 Rev. 1 (04-2009)