Installation
2.2 Installing the first projector (Set A)
Deciding installation position
Decide on the position of Set A and its projection angle.
→
and
Arrangement
WARNING ►You can install the projector for any direction with specified
mounting accessories. Consult with your dealer about such a special installation.
• Set the tilt angle of Set A to within 5 degrees from the level line.
NOTE
Setting up Set A
1.
Turn on Set A.
2.
Run the INSTALLATION setting if necessary as it may change the
image position.
3.
Adjust the image of Set A to fit the screen with the ZOOM, FOCUS and LENS
SHIFT features.
Adjust the image position using KEYSTONE and 3D KEYSTONE if necessary.
(Operating Guide
• KEYSTONE, 3D KEYSTONE, and WARPING functions cannot be
NOTE
used at the same time. Use an appropriate function.
• If using Simple Stack, go to
( 8 )
(continued on next page)
LWU720i/LHD720i/LWU620i
User's Manual - Instant Stack Guide
Adjusting the projector's
(Operating Guide
(Operating Guide
→
EASY MENU
2.3 Installation of the second projector (Set
(User's Manual (concise)
elevator)
→
SETUP menu
→
Adjusting the
or
SETUP
menu)
6
)
lens)
020-001307-01 Rev. 1 (10-2017)
B).