Projecting Images; Displaying And Switching The Image; Focusing The Image; Zooming The Image - Christie LX750 User Manual

9. Projecting images

The basic operation of this product is shown in this chapter. For details, please refer to the
manuals in the CD "User's Manual (detailed)"(
Control panel

9.1 Displaying and switching the image

Pressing one of the following buttons (on the control panel or the remote control) calls
the picture signal from one of the input ports belonging to the category the button's name
shows. And repeating and pressing the same button changes the port to take in the signal
from in the order shown below.
(1) COMPUTER button: COMPUTER IN1
(2) VIDEO button: Component (Y, Cb/Pb, Cr/Pr)
(3) DIGITAL button: HDMI

9.2 Focusing the image

(1) On the control panel, press the FOCUS button first, then use the ◄/► cursor buttons
to adjust.
(2) On the remote control, use the FOCUS +/FOCUS – buttons to adjust.

9.3 Zooming the image

(1) On the control panel, press the ZOOM button first, then use the ◄/► cursor buttons
to adjust.
(2) On the remote control, use the ZOOM +/ZOOM – buttons to adjust.
LX750/LW650/LS+700 User Manual-Concise
Cursor buttons
LENS SHIFT indicator
LENS SHIFT button
COMPUTER button
ZOOM button
VIDEO button
FOCUS button
DIGITAL button
DVI-D
23).
Remote control
LASER
INDICATOR
STANDBY/ON MY SOURCE COMPUTER
VIDEO
ID 1 ID 3
DIGITAL
ID 2 ID 4
BLANK LASER
ENTER
FREEZE MENU
SHUTTER RESET
ASPECT
PbyP AUTO POSITION
MY BUTTON MAGNIFY
1 3
ON
2 4
OFF
KEYSTONE
FOCUS ZOOM
+ +
LENS SHIFT
- -
COMPUTER IN2
S-VIDEO
16
COMPUTER button
VIDEO button
DIGITAL button
Cursor buttons
ASPECT button
FOCUS + button
FOCUS - button
ZOOM + button
ZOOM - button
KEYSTONE button
LENS SHIFT button
BNC
VIDEO 1 VIDEO 2
020-000158-01 Rev. 1 (03-2009)