Installing The First Projector (Set A); Deciding Installation Position; Setting Up Set A - Christie LWU900-DS User Manual

Installation

2.2 Installing the first projector (Set A)

Deciding installation position

Decide on the position of Set A and its projection angle.
→ and
Arrangement
WARNING ►You can install the projector for any direction with specified
mounting accessories. Consult with your dealer about such a special installation.
• Set the tilt angle of Set A to within 3 degrees from the level line.
NOTE

Setting up Set A

1.
Turn on Set A.
2.
Run the INSTALLATION setting if necessary as it may change the
image position.
3.
Adjust the image of Set A to fit the screen with the ZOOM, FOCUS and LENS
SHIFT features.
Adjust the image position using KEYSTONE and 3D KEYSTONE if necessary.
(Operating Guide
• KEYSTONE, 3D KEYSTONE, and WARPING functions cannot be
NOTE
used at the same time. Use an appropriate function.
• If using Simple Stack, go to
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
Adjusting the projector's
(Operating Guide
(Operating Guide
→
EASY MENU
2.3 Installing the second projector (Set
(User's Manual (concise)
elevator)
→
SETUP menu
→
Adjusting the
or SETUP menu)
6
)
lens)
B). ( 8 )
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG