Table of Contents
Advertisement
7.2 Transmitting condition
The remote control works with the remote sensors
on the projector using infrared light (Class 1 LED).
The remote sensor senses the remote control signals
reached into the range within 60 degrees (to right and
left) and 3 meters about from the sensor.
NOTE
* You can inactivate one or two sensors from the three
sensors using the item REMOTE RECEIVE. of the
SERVICE menu under the OPTION menu.
* When you want to use two or more projectors of this
type at the same time and the same place, utilize the
REMOTE ID function. The buttons of ID 1, ID 2,
ID 3 and ID 4 on the remote control can name the
projector given the same ID number as the button by
the item REMOTE ID of the SERVICE menu under
the OPTION menu.
NOTICE
● Avoid exposing directly the remote sensor to any strong lights.
● Do not put anything between the remote control and the remote sensor on the
projector, since it may interfere with transmission of the remote control signals.
7.3 Laser pointer
While pressing the LASER button, the remote control emits a laser beam and lights the
LASER INDICATOR. Use the laser beam as the pointer on the screen.
WARNING
● Use the laser beam of the remote control only for the pointer on the screen. Do not
apply the laser beam to anything except the screen.
- Never hit eyes by the laser beam since the laser beam can injure eyes.
- Do not apply the laser beam to anything except the screen.
LX750/LW650/LS+700 User Manual-Concise
Laser aperture
LASER button
14
Remote sensors
Remote sensor
30°
30°
3 m
about
LASER INDICATOR
020-000158-01 Rev. 1 (03-2009)
Advertisement
Table of Contents
