Advertisement
Quick Links
INTRODUCTION
These instructions outline the details for Lamp and Filter replacement in the LX900 projector (Model
No. 103-014101-01). The lamps are located at the rear of the projector and are accessed by lifting the
lamp cover.
KITS REQUIRED
003-120394-01 (Replacement Lamp Type No.: POA-LMP104)
003-002003-01 (Replacement Air Filter)
INSTRUCTIONS
Do not drop the lamp assembly or touch a glass bulb! The glass can shatter and may cause injury.
Disconnect all power sources to the projector before opening lamp cover.
Allow a projector to cool, for at least 45 minutes before you open Lamp Cover. The inside of a
Use only a Christie approved Lamp and Filter Kit for your specific projector model.
LX900 Lamp/Filter Replacement Instruction Sheet
020-000029-01 Rev. 1 (01/08)
LX900 Lamp/Filter Replacement
projector can become very hot.
NOTICE
Instruction Sheet
DANGER
DANGER
WARNING
1 of 6
Advertisement
Related Manuals for Christie LX900
Summary of Contents for Christie LX900
- Page 1 LX900 Lamp/Filter Replacement Instruction Sheet INTRODUCTION These instructions outline the details for Lamp and Filter replacement in the LX900 projector (Model No. 103-014101-01). The lamps are located at the rear of the projector and are accessed by lifting the lamp cover.
-
Page 2: Lamp Replacement Procedure
NOTE: The Lamp replacement icon will not appear when the Display function is set to “Off” or during “Freeze”. Lamp 1 & 2 Indicators Figure 1 Lamp Indicators 2 of 6 LX900 Lamp/Filter Replacement Instruction Sheet 020-000029-01 Rev. 1 (01/08) -
Page 3: Resetting The Lamp Counter
3. Another confirmation dialog box appears. Select [Yes] to reset the Lamp counter. NOTE: Figure 3 Reset Lamp Counter Do not reset the Lamp counter before replacing the lamp. LX900 Lamp/Filter Replacement Instruction Sheet 3 of 6 020-000029-01 Rev. 1 (01/08) - Page 4 • When the projector is in use for 3 minutes without a new filter cartridge replacement following display “Filter Cartridge Replament” icon, the projector is turned off automatically to prevent damage to the optical components. 4 of 6 LX900 Lamp/Filter Replacement Instruction Sheet 020-000029-01 Rev. 1 (01/08)
-
Page 5: Resetting The Filter Counter
Reset?” appears. Select [Yes] to continue. Select [Yes] to reset 4. Another confirmation dialog box appears, select the Filter counter. [Yes] to reset the Filter counter. Figure 5 Reset Filter Counter LX900 Lamp/Filter Replacement Instruction Sheet 5 of 6 020-000029-01 Rev. 1 (01/08) -
Page 6: Resetting The Scroll Counter
[Yes] to continue. Select [Yes] to reset the Scroll counter. 4. Another confirmation dialog box appears; select Figure 6 Reset Scroll Counter [Yes] to reset the Scroll counter. 6 of 6 LX900 Lamp/Filter Replacement Instruction Sheet 020-000029-01 Rev. 1 (01/08)