Intermec EasyCoder 501 E Installation & Operation Manual page 106

Scaleable Fonts
Kit, cont.
Intermec EasyCoder 501 E – Installation & Operation Ed. 1
Downloading Outline Font Files from a PC
Scaleable outline font fi les come in PC format. Using a personal
computer, such font fi les can be downloaded to the RAM memory
of the printer. The following description applies to the Terminal
program in Microsoft Windows, but similar methods can be used
with other communication programs that support Kermit.
• Break any program running in the printer, for example by
pressing the < C > and < Pause > keys. The printer should be in
the Immediate Mode of Intermec Fingerprint.
• Set up the printer and the computer for RS-232 with the same
communication parameters and connect the computer to the
communication port "uart1:" of the printer.
• Check that the communication works both ways by typing for
example BEEP on the computer. The printer should respond
by emitting a short beeping sound and return Ok to the
computer's screen.
• Set up the printer to receive a fi le by typing:
TRANSFER K "R"
For more information, refer to the TRANSFER KERMIT
statement in the Intermec Fingerprint v6.14, Reference Manual.
• In the Terminal program, select:
Settings\Binary Transfer\Kermit.
• Start the transfer of the fi le by selecting:
Transfers\Send Binary File.
• Select the scaleable outline font fi le you want to transfer, for
example BX000003.SPD.
• At the bottom of the window, the progress of the transfer is shown.
Downloading will take a minute or so, depending on the size of
the fi le.
Chapter 10 Options
105