Intermec EasyCoder 501 E Installation & Operation Manual page 50

Chapter 6 Thermal Transfer Printing
Ribbon Load, cont.
3 4
In case of ribbon reload, remove any used Unpack a roll of original Intermec thermal
ribbon and empty ribbon core. transfer ribbon.
5b
5a
88–90 mm
<60 mm
(3.5 in)
(2.3 in)
#2
#1
In case of ribbon up to 60 mm (2.2 in.) wide, In case of 88 to 90 mm (3.5 in.) ribbon width,
compress the ribbon supply bobbin and move it compress the ribbon supply bobbin and move it
so it snaps into the fi rst (innermost) grove. so it snaps into the second grove.
Intermec EasyCoder 501 E – Installation & Operation Ed. 1 49