Appendix; Feature Support By Protocol For Cisco Unified Ip Phones 7962G, 7942G, 7961G, 7961G-Ge, 7941G, And 7941G-Ge - Cisco 7962G Administration Manual

Feature Support by Protocol for Cisco Unified IP
Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G,
and 7941G-GE
This appendix provides information about feature support for the Cisco Unified IP Phones 7962G,
7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE using the SCCP or SIP protocol with
Cisco Unified Communications Manager Release 7.1.
Table B-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone Guide.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in
Table B-1 Cisco Unified IP Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE Feature Support by
Protocol
Features
Calling Features
Abbreviated Dialing
Audible Message Waiting
Indicator
Auto Answer
Auto Dial
Barge (and cBarge)
Busy Lamp Field (BLF)
OL-18913-01
provides a high-level overview of calling features and their support by protocol. This table
Cisco Unified IP Phones 7962G, 7942G,
7961G, 7961G-GE, 7941G, and 7941G-GE
SCCP SIP
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
A P P E N D I X
For More Information
"Basic Call Handling—Placing a Call: Additional
Options"
"Accessing Voice Messages"
"Using a Handset, Headset, and
Speakerphone—Using Auto Answer"
"Basic Call Handling—Placing a Call: Basic
Options"
"Advanced Call Handling—Using a Shared Line"
"Advanced Call Handling—Using BLF to
Determine a Line State"
B
Table B-1.
B-1