Cisco 7962G Administration Manual page 84

Unified ip phone for unified communications manager 7.1 (sccp and sip)
Hide thumbs Also See for 7962G:
Table of Contents

Advertisement

Network Configuration Menu
Table 4-3
IPv4 Configuration Menu Options (continued)
Option
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
DHCP Server
DHCP Address
Released
Alternate TFTP
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
4-10
Description
Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–5)
used by the phone.
IP address of the Dynamic Host Configuration Protocol
(DHCP) server from which the phone obtains its IPv4
address.
Releases the IPv4 address assigned by DHCP.
Indicates whether the phone is using an alternative TFTP
server.
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the appropriate DNS
3.
Server option, press the Edit
softkey, and then enter a new
DNS server IP address.
Press the Validate softkey.
4.
5.
Repeat Steps 3 and 4 as needed
to assign backup DNS servers.
Press the Save softkey.
6.
Display only—Cannot configure.
1.
Unlock network configuration
options.
Scroll to the DHCP Address
2.
Released option and press the
Yes softkey to release the IP
address assigned by DHCP, or
press the No softkey if you do
not want to release this IP
address.
Press the Save softkey.
3.
1.
Unlock network configuration
options.
2.
Scroll to the Alternate TFTP
option and press the Yes softkey
if the phone should use an
alternative TFTP server.
Press the Save softkey.
3.
OL-18913-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7941g-ge7942g7941g7961g-ge7961g

Table of Contents