Cisco 7962G Administration Manual page 129

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Privacy Prevents users who share a line from adding
themselves to a call and from viewing information
on their phone screens about the call of the other
user.
Programmable line The administrator can assign features to line
keys (PLK) buttons. Softkeys normally control these features;
for example, New Call, Call Back, End Call, and
Forward All. When the administrator configures
these features on the line buttons, they always
remain visible, so users can have a "hard" New
Call key.
Protected calling Provides a secure (encrypted) connection between
two phones. A security tone is played at the
beginning of the call to indicate that both phones
are protected. Some features, such as conference
calling, shared lines, Extension Mobility, and Join
Across Lines are not available when protected
calling is configured. Protected calls are not
authenticated.
Quality Reporting Tool Allows users to use the QRT softkey on a phone to
(QRT) submit information about problem phone calls.
QRT can be configured for either of two user
modes, depending upon the amount of user
interaction desired with QRT.
Redial Allows users to call the most recently dialed phone
number by pressing a button.
OL-18913-01
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide "Barge and
Privacy" chapter.
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Administration Guide, "Phone Button
Template Configuration" chapter
Cisco Unified Communications Manager
•
Administration Guide, "Modifying Phone
Button Templates".
For more information about security, see the
"Overview of Supported Security Features"
section on page 1-13.
For additional information, refer to these:
• Cisco Unified Communications Manager
Security Guide.
For more information refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide, "Quality
Report Tool" chapter.
Requires no configuration.
5-13