Http Configuration Menu - Cisco 7962G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-10 Call Preferences Menu Options (continued)
Option
Call Waiting Preferences
Call Hold Ringback
Stutter Msg Waiting
Call Logs BLF Enabled
Auto Answer Preferences
Speed Dials
Related Topics
•
•

HTTP Configuration Menu

The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Note Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname
which maps to a IPv6 address for directories, services, messages, and information URLs. If you support
the phone's usage of URLs, you must configure the phone and the servers that provide URL services
with IPv4 addresses.
Table 4-11
Table 4-11 HTTP Configuration Menu Options
Option Description
Directories URL URL of the server from which the phone
obtains directory information.
Services URL URL of the server from which the phone
obtains Cisco Unified IP Phone services.
OL-18913-01
Description
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each
line.
Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
Indicates whether stutter message waiting is
enabled (Yes) or disabled (No) for the phone.
Indicates whether BLF for call logs is enabled
(Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether auto
answer is enabled (Yes) or disabled (No) for the
each line.
Displays a sub-menu that displays the lines
available on the phone. Select a line to see the
speed dial label and number assigned to that line.
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-16
describes the options on the HTTP Configuration menu.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
To Change
Use Cisco Unified Communications
Manager Administration to modify.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Use Cisco Unified Communications
Manager Administration to modify.
From Cisco Unified Communications
Manager Administration, choose Call
Routing > Directory Number.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Add a New Speed Dial.
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Device Configuration Menu
4-21