Qos Configuration Menu; Security Configuration Menu - Cisco 7962G Administration Manual

Device Configuration Menu
Table 4-17 Security Configuration Menu Options (continued)
Option Description
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the phone's
ability to accept Gratuitous ARP will prevent
applications that use this mechanism to monitor
and record voice streams from working. If voice
monitoring is not desired, set this option to No
(disabled).
Voice VLAN Indicates whether the phone allows a device
Enabled attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent and
received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone's traffic is running on the
PC. These applications include monitoring and
recording applications and network monitoring
software.
Web Access Indicates whether web access is enabled (Yes) or
Enabled disabled (No) for the phone.
Security Mode Displays the security mode that is set for the
phone.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.

QoS Configuration Menu

The QoS Configuration menu displays information that relates to quality of service (QoS) for the phone.
Table 4-18
Table 4-18 QoS Configuration Menu Options
Option Description
DSCP for Call Differentiated Services Code Point (DSCP) IP
Control classification for call control signaling.
DSCP for DSCP IP classification for any phone
Configuration configuration transfer.
DSCP for Services DSCP IP classification for phone-based
services.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
4-30
describes the options on this menu.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Use Cisco Unified Communications Manager
Administration to modify.
To Change
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
OL-18913-01