Monitoring The Front Panel Display; Front Panel Display Screens And What They Mean; Figure 5-1 Front Panel Lcd Location - Xantrex GT2.5-DE Owner's Manual

Grid tie solar inverter
Hide thumbs Also See for GT2.5-DE:
Table of Contents

Advertisement

Monitoring the Inverter

Monitoring the Front Panel Display

During startup
During startup, the inverter's front panel liquid crystal display (LCD, see
Figure 5-1) shows the first three screens described in Table 5-1, "Startup Screens
on GT Inverter Front Panel Display" on page 5–3.
During waiting
When the protection timer begins, the inverter displays "Reconnecting in sss
period
seconds" (see Table 5-11, "Special Message Screens" on page 5–10).
During operation
When the protection timer stops, the GT Inverter begins selling power, indicated
by the power output reading in the display (see Table 5-3, "Normal Operation
Default Screen" on page 5–5).
When the inverter is
When the GT Inverter is offline (at night, for example) or a fault condition has
offline or there is
been detected, the LCD shows a message screen to indicate that state. The specific
fault condition
fault condition will be identified. See Table 5-6, "Offline Mode Default Display"
on page 5–7 and Table 5-9, "Fault Message Screens" on page 5–8.
Important:

Figure 5-1 Front Panel LCD Location

Viewing more
Additional screens of information about the performance of the GT Inverter can
information
be displayed by tapping the inverter front panel. This causes the LCD to cycle
through a series of information screens in Normal Operation, Offline or Fault
modes. These are described in detail in the following section, "Front Panel
Display Screens and What They Mean".

Front Panel Display Screens and What They Mean

Important:
revision numbers, and performance data will vary.
The front panel display shows different message screens during different modes of
operation (Startup, Normal, Offline, and Fault). All single units display a basic set
of message screens; multiple unit systems display additional screens in Normal
Operation and Offline modes.
5–2
The values in the front panel LCD are not user adjustable.
Tap front panel for
backlight/status screens.
For the tables in this section, all numbers are examples only. Your model,
Front panel LCD
975-0253-01-01
www.xantrex.com.ua

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gt3.8-deGt5.0-spGt2.8-spGt3.8-sp

Table of Contents