AAA-130SA Series Installation and Hardware Guide
Installing the TIRPC Communications Module
The TIRPC communications module must be installed before you
install the Adaptec CI/O Management Software. The module allows
communications between the server and remote clients. Follow the
instructions below for the version of NetWare installed.
NetWare 3.12
1
Insert the Adaptec CI/O Management Software CD-ROM in
your CD-ROM drive.
2
From the NetWare colon prompt (:), type the following and
press Enter:
load install
3
Select Product Options from the Installation Options Menu.
4
Press the <Ins> key.
5
Enter the path to the CD-ROM (do not include the backslash).
6
Select NetWare 3.x TIRPC Runtime and Configuration Files.
(TIRPC must be installed in the sys:system directory only.)
NetWare 4.11
1
Insert the Adaptec CI/O Management Software CD-ROM in
your CD-ROM drive.
2
From the NetWare colon prompt (:), type the following and
press Enter:
load install
3
Select Product Options from the Installation Options Menu.
4
Select Install a Product Not Listed.
5
Press <F3> key.
6
Enter the path to the CD-ROM (include the backslash).
7
Select NetWare 4.0 TIRPC Runtime and Configuration Files.
(TIRPC must be installed in the sys:system directory only.)
5-8