Internal Wide Ultra Scsi Connector (68-Pin) - Adaptec AAA-130SA SERIES Installation And Hardware Manual

AAA-130SA Series Installation and Hardware Guide

Internal Wide Ultra SCSI Connector (68-pin)

Use the internal Wide Ultra SCSI connector to connect internal Fast/
Wide Ultra SCSI peripherals that have 68-pin connectors. Follow
these steps to connect your internal Fast/Wide Ultra peripherals:
Note:
To connect internal Fast/Wide Ultra SCSI peripherals,
a 68-pin internal Ultra SCSI cable, similar to the one shown
in Figure 2-7, is required. (One 68-pin internal Ultra SCSI
cable is included in Adaptec AAA-13xSA RAID card kits.
The cable allows up to four internal Fast/Wide Ultra SCSI
peripherals and has a built-in terminator at the end.)
1
Locate the 68-pin internal Ultra SCSI cable.
Terminator on Cable
Connect to Fast/Wide Ultra SCSI Peripherals
2-10
Figure 2-7. 68-pin Internal Ultra SCSI Cable
Connect to AAA-13xSA
RAID Card