Adaptec AAA-130SA SERIES Installation And Hardware Manual page 51

7
When prompted to save the current version of aspitran.dsk ,
select Yes or No.
8
When prompted to save the current version of nwpaload.nlm ,
select Yes or No.
9
When the message File "A:\netware\v4_1x\nwpaload.nlm was
not found..." appears, ignore the message and press Enter to
continue.
10
Select Continue copying the next file.
11
Select Yes to install an additional disk driver.
12
Select aspicd.dsk and press Enter.
13
When prompted to so save current version of aspicd.dsk , select
No.
14
When prompted to so save current version of aspicd.ddi , select
No.
15
Select No when prompted to install an additional disk driver.
16
Select Continue Installation.
17
Press Enter to continue.
18
Down and exit the server. At the DOS prompt, copy the
nwpa.nlm , nbi.nlm , and nwpaload.nlm files (located on the
Novell Installation CD-ROM) to the server's startup directory
(usually c:\nwserver ).
Note:
To load the driver automatically at server bootup,
make sure the startup.ncf file includes the load command
line for the cda1000.dsk driver. (If you also have an
Adaptec host adapter that uses the Adaptec aic78xx.dsk
driver, make sure the driver loads after the cda1000.dsk
driver.)
Installing Software on a Novell NetWare Server
5-3