C Using A Cd-Rom Drive; Using A Cd-Rom Drive With Dos - Adaptec AAA-130SA SERIES Installation And Hardware Manual

Using a CD-ROM Drive
Should you need to install a CD-ROM, the Array1000SA Family
Manager Set drivers diskette included with the AAA-13xSA RAID
card contains the DOS and NetWare driver software you need in
order to use a CD-ROM controlled by the AAA-13xSA RAID card.
This appendix explains how to set up your CD-ROM drive so that
you can initially install your software.

Using a CD-ROM Drive with DOS

To operate a CD-ROM drive supported by the AAA-13xSA RAID
card under DOS, you need
The SCSI driver, aspi8dos.sys (version 1.32 or later)
The CD-ROM driver, aspicd.sys
The Microsoft CD-ROM extensions, mscdex.exe
The aspi8dos.sys and aspicd.sys files must be copied from the \dos
directory on the Adaptec Array1000SA Family Manager Set driver
diskette to a directory (e.g., c:\scsi ) on your hard disk drive. The
mscdex . exe file is included with MS-DOS 6.x and above (see your
MS-DOS documentation for details).
Note:
If you use MS-DOS 5 and do not have mscdex.exe , we
recommend that you upgrade to MS-DOS 6 or above. You
can also obtain mscdex.exe from Microsoft's Web site,
online bulletin board, or CompuServe forum.
C
C-1