Adaptec AAA-130SA SERIES Installation And Hardware Manual page 40

AAA-130SA Series Installation and Hardware Guide
8
Prepare the array as you normally would prepare a boot disk
drive for your operating system. See either Chapter 4, Installing
Software on a Windows NT Server or Chapter 5, Installing Soft-
ware on a Novell NetWare Server.
Note:
You cannot use this procedure to change the boot
order of a SCSI disk drive that is not part of an array. If you
want to do this, create a one-disk RAID 0 array from the
disk. (Data is not actually striped on a one-disk array.)
3-6