External Wide Ultra Scsi Connector (68-Pin) - Adaptec AAA-130SA SERIES Installation And Hardware Manual

AAA-130SA Series Installation and Hardware Guide

External Wide Ultra SCSI Connector (68-pin)

Use the external Ultra SCSI connector to connect your external SCSI
peripherals. For each external peripheral, you will need to obtain an
external SCSI cable. Follow these steps to connect your external
peripherals:
1
Connect one end of the external SCSI cable to the external SCSI
connector on the AAA-13xSA RAID card.
68-pin External Wide Ultra SCSI Connector
Figure 2-13. Attaching an External Cable to the External SCSI Connector
2-16
68-pin External SCSI Cable
Use a 68-pin to 50-pin
Adapter if you Need to
Connect the AAA-13xSA
RAID Card to a 50-pin Cable
68-pin to 50-pin Adapter
50-pin External SCSI Cable