Using A Feature Key To Unlock Enhanced Features; Adding A Battery Backup Module; Upgrading The Controller Firmware - Adaptec 4000SAS Installation And User Manual

Using a Feature Key to Unlock Enhanced Features

When you receive a feature key, open Adaptec Storage Manager and
unlock the enhanced features, following the instructions provided in
the online Help or in the Adaptec Storage Manager User's Guide.
If you haven't installed Adaptec Storage Manager, or if your operating
system does not support Adaptec Storage Manager, insert the Adaptec
RAID Installation CD into your CD drive, launch Adaptec Storage
Manager, then unlock the enhanced features, following the instructions
provided in the online Help or in the Adaptec Storage Manager User's
Guide.

Adding a Battery Backup Module

This table shows the battery model supported by your Adaptec RAID
controller.
RAID Controller
Adaptec 4800SAS / Adaptec 4805SAS
Adaptec 2420SA / Adaptec 2820SA
Adaptec 2130SLP / Adaptec 2230SLP
To purchase a backup battery module, refer to the Adaptec Web site at
www.adaptec.com

Upgrading the Controller Firmware

To upgrade the firmware on your Adaptec RAID controller, follow the
instructions in Using the Adaptec Flash Utility on page
Chapter 3: About Your RAID Controller
.
Battery Model
Adaptec Battery Module 600
Adaptec Battery Module 500
Adaptec Battery Module 400
115.
21