Adaptec AAA-130SA SERIES Installation And Hardware Manual page 74

AAA-130SA Series Installation and Hardware Guide
Verify that the Registry was updated correctly during installa-
tion. If the values do not match the values listed below, try
reinstalling the Adaptec CI/O Management Software:
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
CIOArrayManagement are:
DisplayName: REG_SZ: CIO Array Management
Service (v x.xx)
ErrorControl: REG_DWORD: 0x01
ImagePath: REG_SZ: [Pathname specified during
installation]iomgr.exe
ObjectName: REG_SZ: LocalSystem
Start: REG_DWORD: 0x02
Type: REG_DWORD: 0x110
SharedMemName: REG_SZ: iomgr.shm
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\EventLog\System\
CIOArrayManagement are:
EventMessageFile: REG_SZ: [pathname to system32
directory]\system32\iomgrmsg.dll
TypesSupported: REG_DWORD: 0x7
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
NobleNetPortmapper are:
DisplayName: REG_SZ: NobleNet Portmapper
ErrorConrol: REG_DWORD: 0x1
ImagePath: REG_EXPAND_SZ: Absolute Path of
"portserv.exe"
ObjectName: REG_SZ : LocalSystem
Start: REG_DWORD : 0x02
Type: REG_DWORD : 0x10
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
CIOArrayManager RPC Command are:
DependOnService: REG_MULTI_SZ: NobleNet
Portmapper CIOArrayManagement
DisplayName: REG_SZ: CIOArrayManager RPC
Command
B-4