Installing The Driver When Windows Nt Is Already Installed - Adaptec AAA-130SA SERIES Installation And Hardware Manual

AAA-130SA Series Installation and Hardware Guide

Installing the Driver When Windows NT is Already Installed

To update or install the cda1000.sys driver if Windows NT is
already installed, follow these steps:
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, and then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Adaptec Array1000SA Family Manager Set driver
diskette in your floppy disk drive and press Enter. Enter the
following path to the installation files and then click OK.
a:\winnt
The Adaptec Array1000SA Family Adapter driver is high-
lighted by default.
8
In the Install Driver window, Click OK.
9
Click the New button when asked if you want to use the cur-
rently installed driver(s) or install new one(s).
10
Type a:\winnt again, and click Continue. The driver is now
installed.
11
You must restart your computer for the changes to take effect.
Click Yes to restart your computer.
4-4