Installing the AAA-13xSA
RAID Card and Connecting
SCSI Peripherals
This chapter explains how to install the hardware. To install the
AAA-13xSA RAID card and peripherals, you will need to
Verify presence of DIMM memory
Back up any existing data
Install the AAA-13xSA RAID card in your server
Connect SCSI peripherals
Note:
If you need to configure the SCSI options (e.g., ID, Par-
ity Checking, and Termination) of your system after the
AAA-13xSA RAID card is installed, see Appendix A, Config-
uring the AAA-13xSA RAID Card with SCSISelect.
2
2-1