Installing the AAA-13xSA RAID Card and Connecting SCSI Peripherals
Verifying Presence of DIMM Memory
Before you can use the AAA-13xSA RAID card, the DIMM memory
socket must be populated with a DIMM, as shown in Figure 2-3. In
most cases, the AAA-13xSA RAID card comes pre-installed with a
DIMM. Nevertheless, a 168-pin EDO 3.3v 60ns or faster DIMM can
be used. Visit the Adaptec Web Site at http://www.adaptec.com/raid
for a list of approved DIMMs and vendors.
168-pin DIMM Module
DIMM Memory Socket
Figure 2-3. Installing DIMM in the DIMM Memory Socket
2-3