Internal Ultra Scsi Connector (50-Pin) - Adaptec AAA-130SA SERIES Installation And Hardware Manual

Installing the AAA-13xSA RAID Card and Connecting SCSI Peripherals

Internal Ultra SCSI Connector (50-pin)

Use the internal Ultra SCSI connector to connect internal Fast/Ultra
Narrow SCSI peripherals that have standard 50-pin connectors.
Note:
To connect internal Fast/Ultra Narrow SCSI periph-
erals, a standard 50-pin internal SCSI cable, similar to the
one shown in Figure 2-10, is required. (One 50-pin internal
SCSI cable is included in Adaptec AAA-13xSA RAID card
kits. The cable allows up to four internal Fast/Ultra Nar-
row SCSI peripherals and has a built-in terminator at the
end.)
Follow these steps to connect your standard internal Fast/Ultra
Narrow peripherals:
1
Locate the 50-pin internal Ultra SCSI cable.
Terminator on Cable
Connect to Fast/Ultra Narrow SCSI Peripherals
Figure 2-10. Connecting Fast/Wide Ultra SCSI Peripherals
Connect to AAA-13xSA
RAID Card
2-13