Adaptec AAA-130SA SERIES Installation And Hardware Manual page 31

Installing the AAA-13xSA RAID Card and Connecting SCSI Peripherals
2
Connect the other end of the external SCSI cable to a SCSI con-
nector on the back of the external SCSI peripheral. If you are
installing only one external peripheral, terminate the periph-
eral and skip to Step 4.
Figure 2-14. Attaching a Single External Peripheral
3
Connect other external peripherals by connecting each periph-
eral to the previous one until all peripherals are connected. The
peripheral at the end of the chain must be the only external
peripheral terminated.
Figure 2-15. Attaching Multiple External Peripherals
4
Connect all power cables to the external peripherals.
Terminator
Terminator
2-17