Ad-100 Menu Settings; Audio_Delay; Delay_Time; Attenuation - Datavideo AD-100 Instruction Manual

AD-100 MENU Settings

N.B. The unit will automatically exit the MENU settings mode if it is left idle for 12 seconds or more.

1. AUDIO_DELAY

This setting switches the audio delay function on or off.
- Press the MENU button to enter the system configuration settings.
- The cursor will flash at the beginning of this menu option.
- Press MENU button again to move the flashing cursor to the setting position.
- Turn the ADJUST knob to select the setting audio delay ON or OFF.
- Press the ADJUST knob in to save or confirm the chosen setting.
- The flashing cursor will return to the beginning of this menu option.
- Rotate the ADJUST knob to choose another menu option or press the mode button.

2. DELAY_TIME

This setting adjusts the audio delay in 10 millisecond (ms) increments to a maximum delay of 700ms.
NB: 1000ms = 1 second
- Press the MENU button to enter the system configuration settings.
- Turn the ADJUST Knob to select DELAY_TIME mode.
- The cursor will flash at the beginning of this menu option.
- Press MENU button again to move the flashing cursor to the setting position.
- Turn the ADJUST knob to select the DELAY_TIME setting value from 0 ~ 700m SEC.
- Press the ADJUST knob in to save or confirm the chosen setting.
- The flashing cursor will return to the beginning of this menu option.
- Rotate the ADJUST knob to choose another menu option or press the mode button.

3. ATTENUATION

This setting adjusts how loud or quiet the audio will be at the output. 0dB=Loud and -60dB=Quiet.
NB: The AD-100 is an Audio Delay device and it can also be used as a Tone Generator. Please DO NOT
connect the AD-100 directly to a headset or set of speakers it should not be used like an Audio AMP.
- Press the MENU button to enter the system configuration settings.
- Turn the ADJUST Knob to select ATTENUATION setting.
- The cursor will flash at the beginning of this menu option.
- Press MENU button again to move the flashing cursor to the setting position.
- Turn the ADJUST knob to select the ATTENUATION setting value from 0 ~ - 60 dB.
- Press the ADJUST knob in to save or confirm the chosen setting.
- The flashing cursor will return to the beginning of this menu option.
- Rotate the ADJUST knob to choose another menu option or press the mode button.
: 1 frame PAL = 40ms :
7
1 frame NTSC = 33.333'ms