Table of Contents
Advertisement
Effects: Freeze
This effect freezes the incoming video, as selected on the Main Source row. There are no parameters, no
variations. Press the button once and the video freezes, press it again, and it returns to the selected source in full
motion.
The Freeze effect is single channel, and works in conjunction with any transition.
Border
This can be used in conjunction with the Picture in Picture Effect and Wipe transitions only, and should be
activated before the Picture in Picture or Wipe is active. In PIP mode the border colour can only be white.
Wipes have 8 Border colors are available: black, blue, magenta, red, green, cyan, yellow and white.
Background
While not strictly an effect, this control is related. This control selects what solid colour the background will be
when selected on either the Main or Sub Video row. There are eight possible background colours; black, blue,
magenta, red, green, cyan, yellow, and white. The button LED lights up in the selected colour with repeated
presses of the button (except for black where the LED goes off), and this is also indicated on the quad preview
monitor output too.
Connecting a computer to the HS-550
Rear input options Channel 4
The HS-550 has the option to accept Composite, or VGA, or DVI input sources for mixing on channel input 4. This
allows the HS-550 to include presentations or graphics from a computer or laptop using the VGA or DVI options of
channel 4. As well as connecting the VGA or DVI cabling from the computer to the rear of the HS-550 (see 1 or 2
above) you will also need to select the input type using the configuration buttons above the T-Bar of the mixer
(see picture on next page).
2
1
1. DVI Input connector
2. VGA Input connector
3. Composite video
3
(Accepted resolution 1024x768)
(Accepted resolution 1024x768)
16
Advertisement
Table of Contents
