Wireless 802.11 Security Settings - Intermec PM43 User Manual

Appendix B — Default Settings

Wireless 802.11 Security Settings

118
This section describes the 802.11 security settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Security.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Setting Description
Security Type Selects the protocol the radio uses to
verify its identity and makes sure that
it is authorized to communicate on
the wireless network.
Association Selects the security method that the
radio uses to get access to the wireless
network.
Pre-Shared Key Defines the passphrase that allows
the radio to authenticate over the
wireless network (for both WPA and
WPA2 security). Range is 8 to 64
characters.
Network Key Selects the active network key to use
Index for WEP security. Range is 1 to 4.
Network Key 1, Defines a network key that is used for
Network Key 2, WEP security. Keys are entered in
Network Key 3, ASCII or hexadecimal (preceded by
Network Key 4 0x) format.
User Name Sets the name that the printer uses
when logging in to the network.
Range is 1 to 96 characters.
Password Sets the password that the printer
uses when logging in to the network.
Range is 1 to 96 characters.
Anonymous Sets the outer EAP user name that
Name the printer uses for logging in to the
network. Maximum length is 96
characters.
Inner Selects the authentication method
Authentication that is used when the EAP type is
EAP-FAST, PEAP, or TTLS.
PM43 and PM43c Mid-Range Printer User Manual
Default
None
Open/WEP
None
1
Empty string
None
None
Empty string
MSCHAPv2