Factory Default Settings - Intermec EasyCoder 4420 User Manual

EasyCoder 4420/4440 Bar Code Label Printer User's Manual

Factory Default Settings

The following table lists the factory default settings for the 4420 and 4440 printer. Use
PrintSet to set these parameters. The printer's default serial port settings are described
in Chapter 2, "Installing the Printer."
Configuration
Preamble Character
Postamble Character
Auto-Transmit 1
Auto-Transmit 2
Auto-Transmit 3
Message Delay
Power-Up Mode
Cutter
End-of-Print Skip Distance
Top of Form
Media Sensitivity
Number of Image Bands
Maximum Label Length
Printer Character Set
Label Retract
Label Retract Distance
Print Speed
Label Stock Type
Intercharacter Delay
Storage Memory (standard)
A-6
Default Setting
Disabled
Disabled
Disabled
Disabled
Disabled
0 milliseconds
5 mil Advanced mode (4420)
2.5 mil Advanced mode (4440)
Disabled
100 dots (0.5 inches)
20 dots (0.1 inches)
470 Direct Thermal/567 Thermal Transfer
3
1000 dots (5 inches)
US ASCII
Disabled
0
3 inches per second (ips)
Die-cut
0 milliseconds
128K flash