Intermec PM43 User Manual page 131

PM43 and PM43c Mid-Range Printer User Manual
Setting Description
CA Certificate Sets the name of the Certificate
Authority (CA) that verifies the server
certificate. This CA should be the
same one that was used to sign the
server certificate.
Client Certificate Sets the name of the client certificate
the printer uses to authenticate to
the network using EAP-TLS.
Maximum length is 128 characters.
Client Key Sets the private key the printer uses
for EAP-TLS. Maximum length is 128
characters. Use the certinstall.sh
script to install the certificate
correctly.
Server Common Sets the certificate name that is on
Name 1 the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is used.
Range is 1 to 96 characters.
Server Common Sets the certificate name that is on
Name 2 the secondary authentication server.
If this value is none, then the value
for Server Common Name 1 is used.
Range is 1 to 96 characters.
Validate Determines if the identity of the
Certificate authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or EAP-TLS.
Intermec recommends that you set
Validate Certificate to Yes.
PAC Sets the name of the Protected Access
Credential (PAC) that is used for
EAP-FAST authentication. The
printer uses this file if Acquire PAC is
on and the current installed PAC fails
to authenticate the printer to the
network.
Acquire PAC Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
Appendix B — Default Settings
Default
intermec.pem
None
None
None
None
No
eap-fast.pac
On
119