Setting Up 802.11 Radio Communications - Intermec PB51 User Manual

Chapter 2 — Con guring the PB51
To set up Bluetooth communications with a mobile computer
To set up Bluetooth communications with a scanner
1 Download and install EasySet.
2 Create the following bar code labels using EasySet:
3 Scan the bar code labels with the Bluetooth scanner.
Understanding Bluetooth Radio Icons
Icon

Setting Up 802.11 Radio Communications

The PB51 can have an internal 802.11 b/g radio to t ransfer and receive
data using wireless communications. This manual assumes that you
have already set up your wireless communications network including
your access points. The following procedures includ e information on
setting up wireless security for both IPL and Fingerprint versions of
the PB51.
28
Follow the procedure to discover and connect to Bluetooth devices
in your mobile computer user's manual.
Note: For maximum security, you need to con gure a Blue tooth
passcode for the PB51C. The default passcode for th e PB51C is
"1234."
Administrator reset factory defaults
Bluetooth parameters - security - not active
Bluetooth parameters - connect/disconnect - compose BT
address
Bluetooth parameters - security - compose PIN:
Description
The Bluetooth radio is on and the printer is not co nnected to a
serial cable.
The Bluetooth radio is turned o . The Bluetooth ra dio turns o
when you connect a serial cable.
PB51 Mobile Label and Receipt Printer User's Guide