Display And Audio Settings - Intermec PM43 User Manual

Appendix B — Default Settings

Display and Audio Settings

126
Setting
Date
Sleep Timer
Command Language Sets the printer command
Alert Notification
Method
Unit of Measure
This section describes display and audio settings for the printer. To
view these settings:
• From the printer Main Menu, select Settings > System Settings >
Display.
• From the printer web page, click the Configure tab > System
Settings > Display or Audio.
Setting Description
Brightness Selects the brightness of the printer screen. Medium
Idle Information Selects the information that appears on the
printer screen when it is in Idle mode.
Time Format Selects the format used to display time on
the printer.
Date Format Selects the format used to display date on
the printer.
Menu Access Determines if the Menu button on the
printer web page is accessible.
PIN Sets the password that allows access to the
Menu button on the printer web page, if
the Menu Access parameter is set to Enable
With PIN. Range is 4 to 16 characters.
Screen Timeout Selects how long the printer screen stays on
before the screen saver starts.
Description
Sets the current date.
Selects the amount of time the
printer waits before it goes to
Sleep mode.
language. If changed, requires
restart.
Selects how you want the printer
to notify you of printer alerts.
Selects the unit of measure that
is used to define several printing
parameters.
PM43 and PM43c Mid-Range Printer User Manual
Default
System date
Disable
Fingerprint
SNMP Trap +
Email
Dots
Default
IPv4 address
24 Hour
dd/mm/yyyy
Enable
1234
Disable