About Wireless Communications - Intermec PM43 User Manual

Chapter 3 — Connect the Printer

About Wireless Communications

44
3 Turn the printer on.
If your printer uses a DHCP server to assign IP addresses, the IP
address appears in the lower left corner of the screen.
• For an icon printer, use Intermec PrintSet to retrieve the printer
IP address.
If you are not using a DHCP server to automatically assign IP
addresses to devices in your network, you must set a static IP
address and other network information manually. Continue with
the next step.
4 For a non-DHCP network:
• For a full touch printer, from the Main Menu select Settings >
Communications > Ethernet > IPv4 or IPv6 and change the
settings as needed.
For an icon printer, configure the Ethernet settings through
•
PrintSet.
IPv4 and IPv6 Ethernet Settings
Setting
(IPv4) IP Assignment Method
(IPv4) IP Address
Subnet Mask
Default Router
DHCP Response
(IPv6) IP Assignment Method
(IPv6) IP Address
The printer supports wireless communications when the optional
Wi-Fi/Bluetooth module is installed.
You can configure wireless communications:
• from the printer web page.
• from the printer Main menu if your printer has full touch display
front panel.
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
PM43 and PM43c Mid-Range Printer User Manual