Intermec PM43 User Manual page 135

PM43 and PM43c Mid-Range Printer User Manual
Setting
Media Margin (X)
Clip Default
Start Adjust
Description
Sets the width of the margin from
the left edge of the label along the
printhead to the edge of the
printable area. Unit of
measurement is defined in the
Unit of Measurement parameter.
INTERMEC
6001 36th Ave W
Everett WA 98203
Determines if the printer prints
items outside the printable area of
the label.
When this is set to Off, the printer
returns an error if any part of a bar
code label cannot be printed
because that part extends beyond
the printable area. When this is set
to On, the printer prints all bar
code labels, but may also print
unreadable, incomplete labels.
Sets the length of media the
printer feeds (positive value) or
retracts (negative value) before
printing a label. Unit of
measurement is defined in the
Unit of Measure parameter. Range
is -9999 to +9999.
Appendix B — Default Settings
Default
Variable
Off
0
123