Replacing The Light Bulbs - Husqvarna Rider ProFlex 18 Operator's Manual

Replacing the light bulbs

For information about the bulb type, see "Technical data".
1. Unscrew the two screws holding the cover on the
power servo housing.
Lift up the cover and turn it around the steering
shaft.
2. Unscrew the two screws holding the lamp insert.
Lift out the lamp insert.
3. Disconnect the cables from the bulbs.
4. Lift out the bulbs from the insert.
5. Insert the new bulbs. Make sure you use your
thumb to support the front.
6. Refit the cables, lamp insert and the cover on the
power servo housing.
42
English-
MAINTENANCE
8009-511
8009-512
8009-513
8009-522