Configuring Ethernet Communications; Configuring Bluetooth Communications - Intermec CN50 User Manual

Chapter 7 — Configuring the Computer

Configuring Ethernet Communications

Configuring Bluetooth Communications

58
You connect your CN50 to your Ethernet network with an Ethernet
cable and an AD24 Ethernet multidock or AD27 single dock with
Ethernet adapter.
To configure Ethernet communications:
1 Connect your CN50 to an ethernet network with an AD24.
Ethernet communications is automatically enabled on your CN50.
2 Make sure that your CN50 is communicating with the network.
You should see the network connection icon (
bar.
Your mobile computer is Bluetooth™-enabled, which lets you connect
to other Bluetooth devices, such as scanners, printers, or audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
To turn on the Bluetooth radio and configure Bluetooth settings:
1 Tap Start > Settings > Bluetooth > Mode.
2 Tap the Turn on Bluetooth check box.
3 (Optional) To make the CN50 visible to other Bluetooth devices,
tap Make this device visible to other devices.
CN50 Mobile Computer User's Manual for Windows Embedded Handheld 6.5
) in the navigation