Charging The Battery; Removing And Installing The Battery - Intermec CK61 User Manual

Charging the Battery

Removing and Installing the Battery

CK61 Mobile Computer User's Manual With Windows Mobile
Note: If the CK61 is not on external power and you remove the
battery pack, it goes into Suspend mode.
Dispose of used batteries promptly. Keep away from children. Contact
your Intermec representative for replacement batteries.
Several factors determine the life of your battery such as extreme
temperatures, input devices, and your usage.
When changing the battery, a backup battery (super capacitor)
maintains your state, memory, and real-time clock for approximately
10 minutes.
The battery pack should be fully charged before you use the CK61 for
the first time. If the temperatures are within the battery charging
range, the standard battery pack takes up to four hours to charge.
The battery is fully charged when its battery status LED shows as
steady green.
To charge the battery
• Insert the battery into a quad battery charger, a single dock, or
attach external power to the CK61 with the battery installed.
Use the next table to understand how long it will take to charge your
batteries in some of the CK61 charging accessories.
Charging Time for CK61 Batteries
Charging Accessory
CK61 Quad Battery Charger
CK61 Single Dock
To maximize the time allowed to replace the main battery pack, put
the CK61 in Suspend mode before removing the battery pack.
Chapter 1 — Using the CK61 Mobile Computer
Model
AC4
AD5
Charging Time
4 hours or less
4 hours or less
5