Installing Applications Using The Ftp Server; Installing Applications Using Wavelink Avalanche - Intermec CK61 User Manual

Chapter 3 — Developing and Installing Applications

Installing Applications Using the FTP Server

HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\ShowFTPMenu
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpAutoStart
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpHeartbeat

Installing Applications Using Wavelink Avalanche

70
2 Insert the SD card into an SD card adapter and then place it in the
storage card reader connected to your PC.
3 Copy your application file to the SD card.
4 Remove the SD card from the adapter and insert it into the CK61.
5 On your CK61, navigate to the storage card folder and run your
application.
The CK61 has a built-in FTP Server that connects to a network
through Ethernet, 802.11ab/g, or Bluetooth communications. You
can use the server to transfer your application file to the computer.
Another benefit of using the FTP server is that you can create FTP
scripts to automate the process of copying your files to the computer.
This option is useful when you need to send files to a large number of
computers.
The easiest way to manage the FTP server is to enable the FTP menu
within iConnect.
To enable the FTP menu
• Create this DWORD registry key and set it to a value of 1:
The iFTP menuy is available the next time you start iConnect.
To manage the state of the FTP server
• Modify these existing registry keys:
Where 1 = enable and 0 = disable.
You can use the Wavelink Avalanche device management system to
install applications on all of your wireless CK61 computers. To use
Wavelink Avalanche, you need to install the Avalanche Enabler on
your CK61.
To install the Avalanche Enabler on your CK61
1 Tap Start > File Explorer > Windows > InstallSelect. The
InstallSelect utility starts.
CK61 Mobile Computer User's Manual With Windows Mobile