Chapter 2 — Connecting and Configuring the CK61
52
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security >
Profile.
5 For Association, choose WPA or WPA2 and tap OK.
6 For 8021.x, choose None.
7 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the CK61 internally converts it to a
pre-shared key.
This value must match the passphrase on the authenticator.
8 Save and exit Intermec Settings.
Configuring 802.1x Security With Funk Security
1 Make sure you have configured the communications and radio
parameters on your CK61.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security >
Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For Authentication, choose TTLS, PEAP, or TLS.
If you choose TTLS or PEAP:
a Select User name and type your user name.
b Select Password prompt, and choose Enter password now.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
CK61 Handheld Computer User's Manual With Windows Mobile