Loading A Certificate - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61

Loading a Certificate

62
Follow these steps to enable WPA authentication using a
preshared key:
a Set Authentication to WPA-PSK.
b Set Data Encryption to either WEP or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication:
a Set Authentication to WPA2.
b Set Data Encryption to AES or TKIP.
c Enter the new Network key.
Follow these steps to enable WPA2 authentication using a
preshared key:
a Set Authentication to WPA2-PSK.
b Set Data Encryption to AES or TKIP.
c Enter the new Network key.
7 Tap Next.
8 From the EAP type list, select either PEAP or Smart Card or
Certificate and then tap Finish.
9 From the Networks to access list, select All Available, Only access
points, or Only computer-to-computer.
10 Tap OK to close the screen.
Note: If you select to automatically connect to non-preferred
networks, the CK61 detects any new networks and provides you with
the opportunity to configure them.
If you choose to use transport layer security (TLS) with WPA or 802.1x
security, you need to have a unique client certificate on the CK61 and
a trusted root certificate authority (CA) certificate. Certificates are
pieces of cryptographic data that guarantee a public key is associated
with a private key. They contain a public key and the entity name that
owns the key. Each certificate is issued by a certificate authority.
CK61 Handheld Computer User's Manual With Windows Mobile