Upgrading The Ck61 Using Smartsystems Foundation - Intermec CK61 User Manual

Chapter 3 — Developing and Installing Applications

Upgrading the CK61 Using SmartSystems Foundation

76
To upgrade the SSPB using an SD card
1 Insert an SD card into a SD adapter card and then place it in the
storage card reader connected to your PC.
2 Copy all required SSPB upgrade files to the SD card.
3 Remove the SD card from the adapter card and insert it into the
CK61.
4 Press and hold the Power button as you insert the battery back
into the CK61.
5 Continue to hold the Power button until a Warning message
appears on the display.
6 Release the Power button, read the message, and press the Enter
key.
When the progress is complete, the CK61 warm boots to reset the
configuration.
7 Set the date, time, and network communication parameters to
reestablish communications with the other devices in the wireless
network.
You can use the SmartSystems console to upgrade the operating
system on your computer. The console is part of SmartSystems
Foundation and is available from the Intermec web site via the
Intermec Developer Library (IDL). Before you can upgrade your
computer, you need:
• the SmartSystems Foundation. To download SmartSystems
Foundation, go to
Management page.
• the device upgrade .exe file. This file is available from the Intermec
web site at www.intermec.com. Go to Support > Downloads.
Make sure the file you select is for your language.
To upgrade the computer using SmartSystems console
1 Install SmartSystems Foundation on your PC and open the
SmartSystems console.
CK61 Mobile Computer User's Manual With Windows Mobile
www.intermec.com/idl and open the Device