Selecting The Current Wireless Printer On The Ck61 - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61
30
The Wireless Printing application uses the concept of a "current
wireless printer." The computer connects to the current wireless
printer when your application opens the wireless printing COM port
on your computer. If there is no current wireless printer selected on
your computer, there is no wireless printing COM port registered on
your computer. You must select a current wireless printer as described
in the next section.
The Wireless Printing application performs these tasks on the
computer:
• Helps you select the current wireless printer
• Stores the current wireless printer in the registry
• Registers/deregisters the wireless printing COM port
• Stores the wireless printing COM port in the registry as the WPort
Specifically, the current wireless printer is registered and deregistered
on Bluetooth stack load/unload. If you select a different current
wireless printer, the existing wireless printing COM port is
deregistered and the new one is registered instead. The Wireless
Printing application uses the Bluetooth COM Port Control to handle
COM port registration/deregistration.

Selecting the Current Wireless Printer on the CK61

By default, there is no current wireless printer selected on the
computer.
There are three ways to select the current wireless printer:
• Discovering the printer using Bluetooth device discovery
• Manually entering the printer's Bluetooth device address
Choosing the printer from a list of previously discovered printers
•
To discover the printer with Bluetooth device discovery
1 Select Start > Settings > the Systems tab > Wireless Printing.
The Wireless Printing wizard appears.
CK61 Handheld Computer User's Manual With Windows Mobile