Configuring Funk Security Using Intermec Settings - Intermec CK61 User Manual

Chapter 2 — Connecting and Configuring the CK61
50
If you want to use the default Funk security, you need to select a
profile. For help, see one of the following sections, "Configuring Funk
Security Using Intermec Settings" on this page or
Funk Security Using the Profile Wizard" on page
If you want to use Microsoft security, you need to select it as your
security choice. For help, see
page 60.

Configuring Funk Security Using Intermec Settings

You can define up to four profiles for Funk security. Different profiles
let your CK61 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile_1.
To select a profile for Funk security
1 Tap Start > Settings > the Systems tab > Intermec Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Select Active Profile, choose a profile from the list, and save your
settings.
4 Tap the active profile to expand it.
5 (Optional) Give your profile a meaningful name:
• Select Profile Label and a text box appears.
• Select the text in the box, type a meaningful name, and save
your settings.
6 Select one profile as the active profile by tapping Active Profile and
choosing a profile from the drop-down list.
7 Save your settings.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPAPSK, or
WPA2-PSK security on your CK61 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Make sure you have configured the communications and radio
parameters on your CK61.
2 Make sure you have selected Funk as your security choice.
CK61 Handheld Computer User's Manual With Windows Mobile
"Configuring Microsoft Security" on
"Configuring
54.