Charging The Battery; Changing The Battery - Intermec CK70 User Manual

Charging the Battery

Changing the Battery

70 Series Mobile Computer User's Manual
Note: If the computer is not using external power and you remove the
battery pack, the computer goes into a power off state and then cold
boots.
You need to fully charge the battery before using your computer for the
first time.
To charge the battery:
• Use one of the charging accessories listed in the next table.
70 Series Charging Accessories
Charging Accessory
Snap-on adapters
DX1 desktop dock and computer cup
DX1 desktop dock and battery cup
DX2 or DX4 base and computer cup
DX2 or DX4 base and battery cup
CN70, CN70e, CK70, and CK71 Vehicle Power Adapter ?? hours
If your battery power is low, you need to either charge the battery in the
computer, or replace it with a charged battery.
Note: The computer resets when you remove the battery.
To change the battery:
1 Save your files and close any open applications.
2 Press the Power button to suspend the computer.
3 Disconnect the handstrap from the computer.
Chapter 1 — Using the Computer
Charging Time
4 hours
6 hours
6 hours
6 hours
6 hours
9