Installing And Charging The Battery - Intermec CN2 User Manual

Chapter 1 — Using the CN2 Handheld Computer
If you fail to replace the battery immediately, you may lose
important data or applications.
Attention: Si la batterie n'est pas remplacée immédiatement,
des données ou applications importantes risquent d'être
perdues.
Vorsicht: Falls der Akku nicht unverzüglich ausgetauscht
wird, können importierte Daten oder Anwendungen
verloren gehen.
Dispose of used battery packs promptly. Keep away from
children. Contact your local Intermec sales representative for
replacement batteries.
Several factors determine the life of your battery, such as extreme
temperatures and your usage.

Installing and Charging the Battery

Make sure you fully charge the battery before you use your
CN2. To charge the battery, you need to install it in the CN2.
To install and charge the battery
1 Push down on the battery door latch, and pull up on the
battery door.
2 Remove the battery door and set it aside.
3 Align the battery contacts, and insert the battery in the
battery compartment. Press down on the battery until it clicks
into place.
6 CN2 Handheld Computer User's Manual